Nerf Longstrike cs-6 mod

this guide is a mod tutorial for the longstrike,very basic mods and some though ones.

First remove the bolt handle from the longstrike,then dismantle the gun.

This should be your internals,or not you must have messed around with it.

Now remove the stock from the gun.

As you can see in the above picture,you carve your longstrike's stock's catching tooth from it's right angle triangle shape to a isosceles triangle,got a little maths here.

When you're done with that,remove the two screws that holds the piece that holds the spring in place ,then remove the whole bolt sled assembly and set it aside for now.

Remove the jam door and for me,i feel that it's useless so keep it or throw it.

These pieces are locks,remove the  narrow piece of plastic and the grey piece with 2 screws holding it in place,then pry it out when the 2 screws are out.and to the right you see a blank space,that's where the trigger lock sits anfd you want that gone too.(sorry no pic of it :p)

The locks should include these two pieces and the grey piece.

Now get your bolt sled assembly and remove the spring first,then remove the plunger.

                                      

We will focus on the plunger tube first,look at the end of the plunger tube (with the o-ring) and remove the o-ring and add a little teflon tape underneath the o-ring,then grease it up and remove the ar anyway you want,drilling or hitting.

Now cut two foam circles the diameter of the plunger out of a foam sheet.Glue them together.

Add some gluie on the face of the foam sheet and glue it to the bottom of the plunger.

Get your bolt sled and you'll find this spring piece at the end of the bolt sled,remove the two screws under that piece and remove the plastic piece and the spring,then screw it back on.

Now close everything up and enjoy!