Homemades - average-sized HAMP

I recently built a HAMP with a leftover pvc.

It took me a lot of work to built this and its not as good as i expeted,but i'm happy with it :)

it is portable too :p

the pump draw is of this length shown in the pic,almost perfect seal :)

here is it fully dismantled.

plunger head ruined upon friction. lol :)

New taping design

I found a new style of taping other than using it for paint jobs.something like stickers.I just tried it on my raider.

Just cut a strip of tape,use a correction pen or a light colored marker and write whatever you want on it and just paste it on the gun.simple :)

Recon - Barrel minimization and prop mod

I found a new mod for my recent minimized recon barrel.What you'll need is a huge foam rod titan missles etc. and a saw.this should be what it looks like.

First you put the foam side to side with the barrel.

cut the foam at the tip of the barrel such that the length of the foam will be similar to the length of the barrel exposed.

Now just sleeve on the foam on the barrel,when youre done,it should look like this.

                     looks nice...like a grenade launcher :)

Nerf - 2011 - Gear up!

recently found a upcoming theme for our common blasters,here are some pics of them.

recon.

maverick.

raider.

and lastly the barricade.

and a big bad bow of this color scheme has been released too!click here for a review on it.

Modified Raider

I've recently modified my raider and it is awesome.this puppy hits ranges of 45ft.

modifications include:

-AR removal
-Spring compression mod
-Teflon tape under o-ring
-Lock removal
-Black barrel and stock design

Here's another pic of it.

anyone's who is interested in this can purchase it by leaving a message in the comments section below.NOTE:this is only open to S'pore

Nerf Raider - shotgun grip mod

i did a mod on my raider to make it pump like a shotgun,and its awesome!

first grab your dremel or saw,a marker,sandpaper and a philipshead screwdriver

first use your screwdriver and unscrew the priming handle.

this should be what you have now,leave the raider and the priming handle piece aside for now

now use your marker and make a little mark at the area similar to the picture's

when you're done,this should be what you will have.

put this bit on the other piece and use your marker to mark the other piece,then cut it off.

when you're done,you should have this,remember to sand it down!

when you're satisifed with what you have,just screw it on and enjoy!if you want more,fill the deadspace at the bottom with epoxy putty and hit it with a new paintjob.

you should have these two as spare parts and DON'T throw it away,the handle can be used for integrations and screws for replacement of missing screws in some guns.

   think you've a much comfortable or cooler one?post it in the comment section :)

Nerf 2011 - Dart Tag - Quick 16 - Box Art

found box art of quick 16,pretty awesome but i still prefer the swarmfire one :)

         credits go to Urbantaggers :D

the theme is pretty much simillar to the swarmfire's,with those teens posing. ;)

Nerf 2011 - Dart tag - Swarmfire - Box Art

once again,Urbantaggers got pics of new nerf and i came across the box art of the Swarmfire,which is.....AWESOME

             credits goes to Urbantaggers :D

there's more to come...! :)

Nerf 2011 - Dart Tag - Cool blue Tagger Darts

If they are blue DT jerseys,it is also a yes for darts!check out the new taggers

         once again,credits go to Urbantaggers for the pics!

these new taggers are simply made up of blue tagger heads with white velcro and much dense foam bodies :)as for the ranges,it would be the same,which sucks....

Nerf 2011 - Dart Tag - Vests >> jerseys?

looks like Dart Tag made a change to their little vests since the don't work well with adults,so they came up with this!i give you the Dart tag jersey!!

          
comes in two new colours which is blue and red,it has the same function as those vest,the 3 patches located from your chest to your abs are actually felt,kinda looks like you have chest hair...like Kong XD

Maverick transformer??

hey guys i found something really sweet!!except that its japanese.i give you...this!!

it's a trnasformer that somehow resembles the maverick,so this is made,pretty cool eh?

and here it is transformed,apparently,it's a decepticon.and it would be alot cooler if the turret fires those plastic darts :)

Big blast/harpoon blaster homemade pump head

this is a concept of my new homemade project.the point of this is because my pump handle's air release hole got plugged and a vacumm effect was formed,so i plan to make a new one.

this is a rough picture of how it'll look like,to get a better picture,simply click on it.

basically i will remove the original pump head and throw on two rubber washer or gasket and hold it on with a screw.you will notice there's two holes on it those two holes acts as the air release holes to prevent the vacumm effect.now for a better explanation of the front.

you should roughly get the picture by now.

Nerf 2011 - Dart Tag - Speedload 6

hey dudes,back with another Dart Tag blaster,the Speedload 6!!!

              once again,credits go to Urbantaggers :)

apparrently,the clip is a built in one,which means you have to load it through a slot beside the barrel.the priming system works like a spectre,and something cool is that the trigger looks like an underwear (cheesy...) and obviously the clip holds 6 Tagger darts,if you ever forget how many you've loaded,there's an indicator with words MIN and MAX.the disadvantage of this gun is that it can't attach a stock like most n-strike cs blasters.

will be back for more posts,stay tuned :)

Homemades - SNAP - new catch design

I was planning to build a homemade and i thought about the snap,it uses a clothespin and nail as the catch and trigger and i doubt a single nail can bear that much weight,so i came up with this catch design.

brief description,rounded the head to go smoothly with the end cap,the material for this will be either polycarb. or acrylic plastic.more designs will be up soon,a big projects awaits!