Tuesday, November 30, 2010

Lego Atlantis Harpoon Blaster unboxing

You cant get an image of the box even if you search Google Images. :| So here's a video of the overview of the box and box art. Watch it n youtube! http://www.youtube.com/watch?v=2eHscaNrcsc

Friday, November 26, 2010

Nerf Raider Mod Guide


What you want to do first,is to open up your raider,what your raider's internals should look like is this,or not you must have messed around with 'em.


Now remove the spring,the catch and the trigger,these are the pieces that will come flying out after a while.

Now remove the piece that holds the plunger in place.it is held by two screws so unscrew it and pry it out (it has 2 pieces that holds the plunger so remove either one of them)
Remove the plunger tube assembly.

knock out the pin that holds the bolt sled to the plunger tube with a micro philips head screwdriver

Leave the bolt sled and the pin aside and focus on the plunger tube and plunger.

You'll notice that there's a small hole on the plunger tube,that hole releases air when the dart is fired,and we don't want it.
So we will fix it with a couple wraps of e-tape
Now remove the plunger and you'll find this part at the end of the plunger tube.(it will be greasy,so be careful) Now, use a micro flathead screwdriver and remove the o-ring,wrap a few rounds of teflon tape on it and put the o-ring back. Try not to touch to much of the grease.

On the other side of the shell,you'll find this piece.Remove the two screws.

Now back to the bolt sled,you would find a nub on the top of it.remove it by cutting,it is the lock of the jam door.



Grab you plunger and cut a foam piece about the diameter of a penny and glue it to the bottom.This will act as the plunger padding.

Now assemble everything.Lost?repeat the first few steps,but the opposite way. Quick Tip*Have a recon spring lying around? swap it with the raider spring. Just close everything back together and enjoy!

                                                              ...BON APPETIT...

Tuesday, November 9, 2010

Unknown nerf guns

I found some unknown nerf guns and some of them can be found in the wii nerf games.and i only found 4 of them.The one above is named, Semperfire RF-200.

Next up is Crusher O.B.B (one.ball.blaster).
This is named Bullsharc GL-8.


Lastly,it's Cerberus cs-12.

This is what i found on google,the rest of them had took a step forward and evolved.I would find time to post up some examples :)

Contract #2 :Recon

This is a contract for the Recon cs-6.the back part of the recon that allows you to attach a stock was removed because it compresses the plastic which makes it really hard to catch.And the bottom grey part was removed because the screw hole was destroyed.

Modifications done:
minimization
spring replacement
A.R removal
locks removal
breech hole sealed
silencing
tagger/suction dart compatibility

with barrel attachment.

Primed.


Here's a quick firing test done wth black suction darts.enjoy. :|

Contract #1 : Maverick

This is a maverick contract that lasted since july till 5thNovember which is when i figured out what's wrong with it until i realise the catch was too weak.So i threw in a couple more recycled lock springs and it's as good as new now.

Modifications done:
additional catch springs
back loop removed
russian roulette
A.R removal
Fade and rusty paint scheme on name
Barrel painted blackblack lines paintjob

Russian roulette.


Here's a video of a simple test fire one with micro-sonic darts.

Lock recycling

When you do lock removal mods,do not throw away the locks!recycle them!These are locks of a Recon cs-6.

And what do you find on them?springs!the springs of these locks are very useful!you can add them to other catch springs to make a stronger catch spring combo!i would rather use these springs than waste money to buy a spring set from hardware stores.It saves your money,and the earth :D

My mini Buzzbee arsenal (9th,Nov,2010)

This is my mini arsenal of my Buzzbee guns

Buzzbee:
Double shot (modded)
Rapid fire rifle (modded)
Laser tek (temporary spoiled)

It's pretty small as i tend to focus more on nerf.But gradually,it will grow larger :)

Blaster Arsenal (9th,Nov,2010)

This is my current arsenal.And i will group it under "Nerf ,Accessories and Spare parts"

Nerf:
Longshot (modded)
Rapid Fire 20 (modded)
Recon (modded)
Raider (modded)
Recon (contract)
Maverick (contract)
Longshot front gun (stock)

Accessories:
4x clips
1x B.B Rapid fire rifle clip
2x Recon stock
2x Recon barrels
1x Recon flip-up sight
1x Recon laser attachment
1x Longshot scope

Spare parts:
Rapid fire 20 shell
Longshot bi-pod legs

The Buzzbee Arsenal will be up next :)

Longshot bolt handle mod

This mod allows you to remove your bolt handle off your Longshot whenever you want to. Note: works with longstrike too

First you need to remove it off your Longshot,so here's a quick tip by 'Sgnerf' on how to remove it. "Use a large flathead screwdriver,wedge it between  the orange handle and casing (put a cloth inbetween to prevent scratches) then use strength to pry them apart."




When you had already pry them apart,leave the piece with the metal rod aside and you'll two screws on the bottom of the other orange piece.


Now remove those two screws.

Leave the two screws and the orange cone aside,and use an exactor knife or pen knife to shave it a little on the inside of the four sides.Fit it on the metal rod to make sure you got what you want.


When it's done shaving,it should look like this.Now screw everything back and fit it back on the Longshot.                                                                    






Monday, November 8, 2010

Nerf Longshot internals diagram

This is a diagram of the internals of a Nerf longshot.It names each and every part of the longshot which is very helpful for newbies who are modding longshots.to get a closer look,simply click on it.and the illustrator of this diagram is 'Captainslug' who is a member of the 'Nerfhaven' society. :)

Greetings

welcome to my blog,in this blog,you'll find tutorials on classic modifications on nerf and foam blasters.so stay tuned for upcoming posts :D